Freestyle Forum
VIDEOS => D.I.Y. Guides => Cord/Chain Connectors => Topic started by: auric18 on October 18, 2010, 09:05:12 PM
-
I bought foam nunchaku from the martial art shop. It is 7 link chain but I realized it is to long and I want 5 link or 3 link chains. I was wondering if you can change the chain link on the ball bearing if so could someone either do a tutorial or breifly explain how to do it and what tools and things you would need. Any help would be appritiated.
-
You can just cut the links that are in middle...
-
You can just cut the links that are in middle...
... and then add a quick link:
(http://image.made-in-china.com/2f0j00yelaSvZgrIki/Quick-Link.jpg)
-
I thought I could knock the pin out alittle bit and replace the chain and knock it back in with hammer after putting a new chain on that is shorter.
-
I thought I could knock the pin out alittle bit and replace the chain and knock it back in with hammer after putting a new chain on that is shorter.
You thought right, I myself just use a nail to punch out the tension pin. Be sure to have your swivel sit on an elevated platform to prevent smashing it off it's socket. If you're working with a rivet though, you gotta destroy that thing - an angle grinder did the job for me though I can't stress enough on how careful you should be. Google Image search "Angle Grinder Accident" I dare you.
-
vise grips can make a handy mini vise, though a vise is easier. a hack saw or bolt cutters to cut chain. if you use mini links I'd use a small drop of silicone caulk/sealer on the threads it will lock it in place but you can still take it apart with a little more effort, use it on your pin as well if your pin is loose after you reset it. :thumb: