Freestyle Forum
VIDEOS => D.I.Y. Guides => Cord/Chain Connectors => Topic started by: Seventh_He4ven on July 26, 2009, 03:19:30 PM
-
Anyone had a go at converting a chain set (perhaps a broken BB set) into a cord set. And any photos on how this has turned out?
Also, any help on removing a rivet would be appreciated.
My apologies if this has been a topic already, I'm a bit busy to hunt it down right now.
-
Kriztov made a video I think. Or at least had loads of pictures of this exact thing... :-/
To remove the pin, put a small drill bit or pokey of some sort into the hole, onto the pin (but not the chucks - so it has to fit through the hole) and hammer it a little and the other end should come out, and you can grab it with pliars.
If you have a fixed rivet, drill it out - starting with smallest size drill bit it could possibly be going up intil it falls apart. Note: You may have to drill a bigger hole then the hole the rivet went through to accommodate the metal enlarging inside.
:R